A girth-first dildo: 8.26" overall with 7.48" insertable, and 2.1" across — roughly 7" in circumference at the widest point. The mass is in the shaft rather than the length, which is a very different experience from a long, narrow toy.
It is cast in dual-density silicone: a firmer inner core that holds the shape under its own weight, wrapped in a softer outer layer that gives under pressure. The surface is sculpted rather than moulded smooth — a pronounced ridge under the crown, raised off-centre veining down the shaft, and sculpted balls above the base.
The suction-cup base holds on smooth, non-porous surfaces such as tile, glass or a sealed tub, and the flared foot seats in most strap-on harnesses — check that your O-ring is wide enough for 2.1" before you plan a session. Silicone is non-porous and fully waterproof, so it can be properly cleaned rather than just wiped.
Use water-based lubricant only. Silicone lubricant bonds to silicone toys and permanently degrades the surface.
Dimensions: 8.26" (210 mm) total, 7.48" (190 mm) insertable, 2.1" (54 mm) diameter, 7" (177 mm) circumference, 530 g. Ships discreetly in a sealed, unmarked box.
-
Fast Delivery
Your Ultimate Pleasure in
69mins or less -
Discreet Packaging
Packaging is completely anonymous
-
Stay Anonymous
We gladly accept payments via
CRYPTOCURRENCIES -
Customer Support
Live chat human-agents
available 24x7
The shape
Built around the girth, not the length
8.26″ overall, but only 7.48″ of that goes in. The number that actually matters here is the one across — 2.1″ of diameter, 7″ around at the widest point.
Plenty of dildos chase length. This one puts the mass in the shaft and keeps the insertable length in a range most people can actually take, which is a very different experience from a long, narrow toy.
- 8.26″ total
- 7.48″ insertable
- 2.1″ diameter
- 7″ around
- Dual-density silicone
- Suction-cup base
- Harness compatible
- Waterproof
01 · The girth
Nearly as wide as a soda can
A standard 12 oz can is about 2.6″ across. At 2.1″, this sits just under that — close enough that the can shown alongside it in the product photos is a fair comparison, not a trick of the camera.
Go slower than you think you need to. Girth is the dimension that punishes impatience, and the raised veining you can see here adds texture on top of the diameter rather than smoothing over it.
02 · Anatomy
Sculpted, not moulded smooth
Three areas were shaped separately rather than pulled from one clean cylinder, which is what gives the silhouette its bends and steps.
#1
Crown
A pronounced ridge under the head, so there is a defined step rather than a taper straight into the shaft.
#2
Veining
Raised along the length and set off-centre, so it drags rather than sitting flat against the shaft.
#3
Base
Sculpted balls above the suction disc — which is also what stops it going any further than it should.
03 · Material
Soft outside, firm through the middle
Dual-density means two silicones cast together: a firmer core that holds the shape, wrapped in a softer outer layer that gives under pressure.
A single-density toy at this diameter is either too rigid to be comfortable or too soft to stay upright. Splitting the job between two layers is how you get both — a surface that yields, on a body that does not fold.
- Silicone throughout — no PVC, so no plasticisers and no phthalates
- Non-porous — the surface can be properly cleaned, not just wiped
- Fully waterproof — nothing electronic inside to keep dry
04 · Mounting
Two ways to use it hands-free
The base does double duty: a suction disc for flat surfaces, and a flared foot that seats in a strap-on harness.
- Smooth, non-porous surfaces only — tile, glass, a sealed tub or a finished floor. Grout lines, textured paint and raw wood will not hold.
- Press, don’t twist — push the air out from the centre and hold it for a few seconds.
- Check your O-ring first — at 2.1″ across, this needs a larger ring than the one most harnesses ship with. Measure before you commit to a session.
05 · Measured
The numbers
Every figure below is the manufacturer’s own, converted both ways.
| Measurement | Imperial | Metric |
|---|---|---|
| Total length | 8.26″ | 210 mm |
| Insertable length | 7.48″ | 190 mm |
| Diameter | 2.1″ | 54 mm |
| Circumference | 7″ | 177 mm |
| Weight | 1.16 lb | 530 g |
| Material | Dual-density silicone | Non-porous |
| Base | Suction cup | Harness compatible |
| Water | Waterproof | Shower and tub safe |
One honest note on the two width figures: a 2.1″ diameter works out to roughly 6.6″ around if the shaft were a perfect circle. The manufacturer quotes 7″, measured at the thickest point of a shape that is neither round nor even. Plan for something in the 6.6″–7″ range rather than treating either number as exact.
06 · Care
Four things, every time
Silicone is the easy material to look after — as long as you keep one thing away from it.
-
Water-based lubricant only
Silicone lubricant bonds to silicone toys and degrades the surface. The damage does not reverse, so this is the one rule that matters.
-
Wash before and after
Warm water and a mild unscented soap, or a dedicated toy cleaner. Work into the ridge under the crown and around the base.
-
Dry it fully
Pat it dry and let it air out before storing. Trapped moisture under the suction cup is what starts a smell.
-
Store it on its own
Silicone can react with other silicone over time. Keep it in its own bag or box rather than loose in a drawer with everything else.
Before you buy
This is a girth-first toy
2.1″ across is meaningfully wider than average, and no amount of warm-up makes width optional. If you have not used something in this range before, treat the diameter as the decision — not the length — and give yourself far more time and lubricant than you think you need.
Adult product, 18+. Ships in a sealed, unmarked box with no product name or imagery on the outside. For hygiene reasons this item cannot be returned or exchanged once opened. 69-minute local delivery across Miami, Fort Lauderdale and Palm Beach, plus free curbside pickup.