Ir directamente al contenido
ORDER NOW — at your door by [delivered_by]
EXPRESS local delivery in 69min or less
LATER scheduled delivery or pickup available
OPEN 369 days a year, 24 hours a day
ALWAYS discreet packaging
MIAMI'S best kept secret
READY before you find parking — free curbside pickup
PULL UP — your order's waiting at the curb by [ready_by]
FASTER than a quickie — curbside pickup in 5min flat
IN A HURRY? We'll run it out — curbside in 5
SKIP the wait — order ahead, pull up, drive off
5 MINUTES from “add to cart” to your passenger seat
Buscar
Carrito
Ir directamente a la información del producto

8" Girth Huge Thick Dildo - 2.56" Wide, 5.8" Insertable, Dual-Density Silicone Dong with Suction Cup

Precio Regular
$135.00
Precio Regular
Precio de oferta
$135.00 Ahorra $-135.00 (%)
Ir al carrito
Ir al carrito

A girth-first dildo. The shaft is 2.56" across at its widest and 8" around, and width rather than reach is the entire point. This is a size to choose deliberately — if you already know you want that stretch, it is built for it.

Overall length, and what actually goes in

It is 8.85" overall but 5.8" insertable. The other three inches are sculpted base and suction cup, and they stay outside. 5.8" is the number that matters in use.

Construction

Dual-density silicone: a firm inner core that holds the shape under its own weight, wrapped in a softer outer layer that gives under pressure. The shaft carries raised veining and a defined ridge under the crown, the tip is tapered to start, and the curve runs forward so pressure lands along the front wall — the G-spot on one body, the prostate on another.

The base, and why it matters

The shaft narrows into a neck and then flares out again. The sculpted base measures 3.23" across against 2.56" at the widest point of the shaft, and the suction cup underneath is 2.7" in diameter. That flare is wider than anything that goes in, which is what makes it safe to use anally — it cannot be drawn past the entrance. The same foot seats in most strap-on harnesses; check your O-ring takes 2.56" before you plan around it.

Using it

2.56" across is a lot. Go slow, use plenty of lubricant, and stop if anything hurts — pain is the signal to stop, not to push through. Water-based lubricant only. Silicone lubricant bonds to silicone and permanently ruins the surface. Wash with soap and warm water before and after; the silicone is non-porous and fully waterproof, so it cleans properly rather than just wiping down.

Dimensions

  • Overall length 8.85" (22.5 cm)
  • Insertable length 5.8" (14.7 cm)
  • Maximum diameter 2.56" (6.5 cm)
  • Circumference 8" (20.3 cm)
  • Base 3.23" (8.2 cm) across, suction cup 2.7" (6.9 cm)
  • Weight about 1.6 lb (720 g)

Ships discreetly in a plain, unmarked box. Adult product, 18+.

  • Fast Delivery

    Your Ultimate Pleasure in
    69mins or less

  • Discreet Packaging

    Packaging is completely anonymous

  • Stay Anonymous

    We gladly accept payments via
    CRYPTOCURRENCIES

  • Customer Support

    Live chat human-agents
    available 24x7

69-minute instant local delivery across Miami, Fort Lauderdale and Palm Beach — or collect it yourself with FREE curbside pickup.

Two numbers, not one

8.85 inches long. 5.8 inches of that goes in.

The gap between those figures is three inches of sculpted base and suction cup, and none of it is insertable. If you are picturing depth, picture 5.8". That is the working figure.

What you are actually buying here is width. The shaft runs 2.56" across at its thickest and 8" around, and everything about the shape — the taper at the tip, the forward curve, the mass through the middle — is arranged around carrying that width comfortably.

Full front view of the thick girth dildo
Front view. The widest point sits about a third of the way down the shaft.
Measured
Overall length8.85" / 22.5 cm
Insertable length5.8" / 14.7 cm
Maximum diameter2.56" / 6.5 cm
Circumference8" / 20.3 cm
Base across3.23" / 8.2 cm
Suction cup2.7" / 6.9 cm diameter
Weightabout 1.6 lb / 720 g
MaterialDual-density silicone, non-porous

A 2.56" diameter and an 8" circumference are the same measurement taken two ways.

Width

Two and a half inches across is a lot

Close view of the veined shaft above the base
Raised veining and a defined ridge below the crown.

This is a size you choose deliberately. If you already know you want that stretch, the proportions here are built for it — if you are not sure, start somewhere narrower and come back.

The tip is tapered so there is something to begin with, then the shaft thickens steadily rather than stepping up. The curve runs forward, so pressure lands along the front wall: the G-spot in one body, the prostate in another.

The foot

Why the base is shaped the way it is

Above the base the shaft pinches into a neck, then the sculpted foot flares back out to 3.23" across — wider than the 2.56" at the thickest part of the shaft. Underneath that sits a 2.7" suction cup.

That flare is the reason this one is safe to use anally: nothing narrower than the widest insertable point can be drawn past the entrance, and this foot is wider still. The same foot drops into most strap-on harnesses — measure your O-ring against 2.56" first.

The cup grips tile, glass, a sealed tub wall or a mirror. It wants a smooth, clean, dry surface; grout lines and textured acrylic will let go.

Flared base resting on the suction cup
The foot flares wider than anything above it.

Construction

Firm inside, soft on the outside

Cutaway showing the firm inner core
The pale band is the firm inner core.

Two silicones cast together. The inner core is firm enough to hold the shape under the toy's own 1.6 lb, so it does not fold over at this diameter. The outer layer is softer and gives under pressure, which is what keeps that much width manageable.

Silicone is non-porous and fully waterproof, so it washes properly rather than only wiping down.

Seventeen seconds

What a photograph leaves out

Shot on a turntable, then picked up by hand. The hand is the only scale reference that matters.

Full turn, the cup head-on, then fingers pressing into the side of the shaft.

Two moments are worth waiting for. Near the end a hand presses into the side of the shaft and the surface sinks a long way before anything underneath stops it — that is dual density, doing the thing the word describes.

The other is how early the shaft reaches full width. It does not build gradually towards the base the way a tapered shape does. It widens near the tip and then stays there, which is why 2.56" is the number to plan around rather than an average.

Before you start

Go slow. Use more lubricant than you think.

Water-based lubricant only. Silicone lubricant bonds to silicone and permanently ruins the surface. We stock both — reach for the water-based bottle with this one.

  • Warm it in your hands or under the tap first. Cold silicone at this width is harder work.
  • Build up. Something narrower first makes the difference at 2.56".
  • Reapply lubricant during, not just at the start — water-based formulas dry out.
  • Stop if it hurts. Pain is a signal to stop, not something to push through.

Care

Washing and storage

Warm water and mild soap before and after use, or a dedicated toy cleaner. Air-dry fully, then store it away from other silicone items — silicone left pressed against silicone can mark over time. A cotton bag or its own drawer is enough.

Intimate item. Sold with a hygiene seal and non-returnable once that seal is broken. Ships in a plain, unmarked box. Adult product, 18+.